CLK-DTM 2002 Mercedes Military Scale Model In R/C .

(0 item)

sitemap


	Armor

	Aircraft

	Figure

	Ship

	Car

	Motorcycle

	Guy Things

	R/C

	Tips & Technique

	Paints

	Public Show Room







	Community

> > R/C

CLK-DTM 2002 Mercedes

The AMG Mercedes CLK-DTM 2002 piloted by former F1 driver J.Alesi, has been reproduced by Tamiya as an R/C car. It is based on the lightweight high performance monocoque frame shaft-driven 4WD TL-01LA chassis. Long suspension arms provide superb maneuverability even on slightly rough terrain. Requires a 2 channel radio and 7.2V battery. Chassis Type: TL-01LA Scale: 1/10 Length: 17.72 inches (450mm) Width: 7.28 inches (185mm) Wheelbase: 10.83 inches (257mm) Front Tread: 6.18 inches (157mm) Rear Tread: 6.18 inches (157mm) Weight: 3.46 lbs. (1570g) Chassis: ABS Monocoque Suspension: 4 wheel independent Damper Type: Plastic coil over friction Drive Train: 4WD shaft drive Gear Ratio: 7.96:1 Differential Type: Bevel Gear Engine: Electric 540 Speed Controller: 3 Step F&R Mechanical Wheels & Tires: 10 spoke / Slick Body Type: Clear/Polycarbonate Steering tie rod: 2 part Suspension: front and rear double wishbone Damper: friction damper Transmission type: shaft drive mid-ship full-time 4WD Diff. gear system F/R: 3-Bevel Diff Tire width F/R: both 27mm Tire diameter F/R: both 64mm Tread pattern F/R: slicks Power source: 7.2V battery Includes Long Arm suspension kit (LA) 53467 TL-01 & FF02 Long suspension arm set 53440 On-road tuned hard spring set 53418 TL-01 Universal shaft (2pc.) 53347 3x3mm spring set screws (10pc.) 53346 TL-01/M03 quick release battery holder 53345 TL-01/M03 toe-in rear upright 53342 TL-01 speed-tuned gear set 53333 Touring car tuned spring set (short) 53324 TL-01 stabilizer set 53323 TL-01 carbon propeller shaft 53322 TL-01 hollow carbon gear shaft 53303 TL-01 adjustable upper arm set 53301 TL-01 stainless steel suspension shaft set 53300 TL-01 turnbuckle tie-rod set 53295 Tire inner foam 53292 TL-01 ball bearing set 53280 TA03 super low friction damper set (4pc.) 53267 TA03 ball differential 53163 On-road tuned spring set 53162 4mm anodized aluminum flanged lock nuts (black) 53161 4mm anodized aluminum flanged lock nuts (gold) 53160 4mm anodized aluminum flanged lock nuts (red) 53159 4mm anodized aluminum flanged lock nuts (blue) 53144 Touring & rally car bushing & ball connector set 53141 4WD touring & rally car lightweight king pins 53095 3x10mm titanium tapping screw (10pc.) 53056 Pin type wheel adapter 50357 22T, 23T AV pinion gear set (only the 23T gear in this set is compatible with the TL-01) 50356 20T, 21T AV pinion gear set (only the 21T gear is compatible with the TL-01)